Ciao a tutti, ho un vecchio pc portatile HP con ubuntu 18.04.3 LTS installato. Ho un problema da diversi mesi: funziona solo una porta usb tre. Provo a postare lsusb senza nulla attaccato. Bus 002 Device 007: ID 0cf3:311f Atheros Communications, Inc. Bus 002 Device 003: ID 0bda:58de Realtek Semiconductor Corp. Bus 002 Device 018: ID 1f85:6053 Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub se invece attacco l'e-reader kindle e dò lsusb ottengo Bus 002 Device 007: ID 0cf3:311f Atheros Communications, Inc. Bus 002 Device 003: ID 0bda:58de Realtek Semiconductor Corp. Bus 002 Device 019: ID 1949:0004 Lab126, Inc. Amazon Kindle 3/4/Paperwhite Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub allora, questo è lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM75 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) questo è dmesg | grep usb [ 0.668049] usbcore: registered new interface driver usbfs [ 0.668056] usbcore: registered new interface driver hub [ 0.668074] usbcore: registered new device driver usb [ 1.452222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.452224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.452225] usb usb1: Product: EHCI Host Controller [ 1.452226] usb usb1: Manufacturer: Linux 4.15.0-72-generic ehci_hcd [ 1.452227] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.472239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.472241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472242] usb usb2: Product: EHCI Host Controller [ 1.472243] usb usb2: Manufacturer: Linux 4.15.0-72-generic ehci_hcd [ 1.472244] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.788039] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.808039] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.944460] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.944462] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.964436] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.964438] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.252024] usb 2-1.3: new high-speed USB device number 3 using ehci-pci [ 2.441141] usb 2-1.3: New USB device found, idVendor=0bda, idProduct=58de [ 2.441144] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.441145] usb 2-1.3: Product: HP Truevision HD [ 2.441147] usb 2-1.3: Manufacturer: DCUSA014P3F07E [ 2.441148] usb 2-1.3: SerialNumber: 200901010001 [ 2.524109] usb 2-1.4: new full-speed USB device number 4 using ehci-pci [ 2.633143] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [ 2.633146] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.744114] usbcore: registered new interface driver usb-storage [ 33.144813] usbcore: registered new interface driver btusb [ 33.306179] Modules linked in: snd_pcm arc4 intel_rapl x86_pkg_temp_thermal intel_powerclamp ath9k(+) kvm_intel ath9k_common kvm ath9k_hw i915(+) irqbypass crct10dif_pclmul snd_seq_midi crc32_pclmul snd_seq_midi_event ath ghash_clmulni_intel cryptd snd_rawmidi intel_cstate mac80211 intel_rapl_perf joydev input_leds ath3k(+) serio_raw snd_seq btusb btrtl snd_seq_device btbcm snd_timer btintel rtsx_pci_ms bluetooth drm_kms_helper ecdh_generic cfg80211 snd memstick drm i2c_algo_bit fb_sys_fops mei_me lpc_ich syscopyarea sysfillrect mei shpchp soundcore sysimgblt wmi video mac_hid hp_wireless sch_fq_codel usb_storage coretemp parport_pc ppdev lp parport ip_tables x_tables autofs4 rtsx_pci_sdmmc ahci psmouse libahci r8169 rtsx_pci mii [ 33.492228] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12 [ 33.492338] usbcore: registered new interface driver uvcvideo [ 33.759414] usbcore: registered new interface driver ath3k [ 33.970788] usb 2-1.4: USB disconnect, device number 4 [ 34.192018] usb 2-1.4: new full-speed USB device number 5 using ehci-pci [ 39.501447] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [ 39.501454] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [13966.966474] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [13967.154561] usb 2-1.4: reset full-speed USB device number 5 using ehci-pci [13967.262923] usb 2-1.4: device firmware changed [13967.271907] usb 2-1.4: USB disconnect, device number 5 [13967.354410] usb 2-1.4: new full-speed USB device number 6 using ehci-pci [13967.463844] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [13967.463851] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [13970.560250] usb 2-1.4: USB disconnect, device number 6 [13970.782296] usb 2-1.4: new full-speed USB device number 7 using ehci-pci [13975.967330] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [13975.967334] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [14677.045577] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [14677.233628] usb 2-1.4: reset full-speed USB device number 7 using ehci-pci [14677.341958] usb 2-1.4: device firmware changed [14677.354488] usb 2-1.4: USB disconnect, device number 7 [14677.437467] usb 2-1.4: new full-speed USB device number 8 using ehci-pci [14677.552274] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [14677.552281] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [14677.826532] usb 2-1.4: USB disconnect, device number 8 [14678.053547] usb 2-1.4: new full-speed USB device number 9 using ehci-pci [14683.283066] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [14683.283074] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [16107.893640] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [16108.081640] usb 2-1.4: reset full-speed USB device number 9 using ehci-pci [16108.189923] usb 2-1.4: device firmware changed [16108.205485] usb 2-1.4: USB disconnect, device number 9 [16108.293495] usb 2-1.4: new full-speed USB device number 10 using ehci-pci [16108.402743] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [16108.402749] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [16108.673359] usb 2-1.4: USB disconnect, device number 10 [16108.897612] usb 2-1.4: new full-speed USB device number 11 using ehci-pci [16114.022562] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [16114.022566] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [22013.967527] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci [22014.155477] usb 2-1.4: reset full-speed USB device number 11 using ehci-pci [22014.263929] usb 2-1.4: device firmware changed [22014.276280] usb 2-1.4: USB disconnect, device number 11 [22014.359359] usb 2-1.4: new full-speed USB device number 12 using ehci-pci [22014.468687] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [22014.468690] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [22014.751768] usb 2-1.4: USB disconnect, device number 12 [22014.975334] usb 2-1.4: new full-speed USB device number 13 using ehci-pci [22015.084676] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=311f [22015.084680] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 questo è lsmod|grep hci ahci 40960 3 libahci 32768 1 ahci che posso provare a fare per far funzionare le altre porte usb?
5 su 8
mostra altri 3 commenti
|
Segui questa domanda
Via email:Una volta eseguito l'accesso potrai iscriverti a tutti gli aggiornamenti qui
Via RSS:Basi di markdown
- *corsivo* o __corsivo__
- **grassetto** o __grassetto__
- collegamento:[testo](http://url.com/ "titolo")
- immagine?
- elenco numerato: 1. Foo 2. Bar
- per aggiungere un'interruzione di riga, aggiungi due spazi a fine riga e premi «Invio»
- è supportato anche semplice HTML
Tag:
domanda posta: 08 Jan '20, 21:55
domanda visualizzata: 673 volte
ultimo aggiornamento: 25 Jan '20, 14:16
1f85:6053 viene trovato, anche se non ha la descrizione
puoi vedere errori da: dmesg | grep usb
ho provato a mettere tutto dentro alla domanda ma non la vedo completa.... solo nelle revisioni vedo quello che ho inserito. è corretto cosi?
sacarde, io non vedo più la tua risposta che mi è arrivata via mail...
anche io mi sono perso alcune risposte...
dicevo che da lspci non si vede il controller per usb3:
ehci-hcd usb 2.0 'enhanced' host controller (ehci) driver
xhci-hcd usb 3.0 'extensible' host controller (xhci) driver
p.s. da bios lo vedi?
ciao, sul bios non capisco come si vedono. Premendo f2 all'inizio mi apre il UEFI e da lì c'è la possibilità di fare il test delle porte usb e due su tre non lo passano. Nel bios dove posso vederlo?
qui come abilitare porte da bios
COME ABILITARE LE PORTE USB DA BIOS/UEFI
https://www.informarea.it/le-porte-usb-non-funzionano-come-risolvere/
In quel sito non spiega come abilitare le porte usb. Ho cercato su internet perchè effettivamente credo che quello sia il problema, ma ho riavviato una decina di volta facendo partire il SETUP BIOS e il HP UEFI ma l'abilitazione delle porte non c'è. Nel BIOS non trovo l'impostazione avanzata che nei vari siti che ho consultato mi dice sempre disponibile. Boh... Hai altri siti che spiegano più in dettaglio?
quale e' il modello preciso del tuo portatile?
quale e' la funzione di test delle porte usb?