UBUNTU 18.04-Assenza connessione internet con LAN

Buongiorno, grazie mille per l'interessamento. Ecco il resoconto: ~$ lspci 00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0a) 00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0a) 00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0a) 00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0a) 00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0a) 00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0a) 00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0a) 00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0a) 00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0a) 00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0a) 00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0a) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)

~$ dmesg | grep eth [ 12.882499] toshiba_acpi: Supported laptop features: touchpad special-function-keys panel-power-on usb3 cooling-method

Network: Card-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter driver: ath9k IF: wlp2s0 state: up mac: 64:5a:04:b2:28:42 Card-2: Realtek RTL810xE PCIE Fast Ethernet controller IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A

~$ modinfo r8169 filename: /lib/modules/5.3.0-46-generic/kernel/drivers/net/ethernet/realtek/r8169.ko firmware: rtl_nic/rtl8107e-2.fw firmware: rtl_nic/rtl8107e-1.fw firmware: rtl_nic/rtl8168h-2.fw firmware: rtl_nic/rtl8168h-1.fw firmware: rtl_nic/rtl8168g-3.fw firmware: rtl_nic/rtl8168g-2.fw firmware: rtl_nic/rtl8106e-2.fw firmware: rtl_nic/rtl8106e-1.fw firmware: rtl_nic/rtl8411-2.fw firmware: rtl_nic/rtl8411-1.fw firmware: rtl_nic/rtl8402-1.fw firmware: rtl_nic/rtl8168f-2.fw firmware: rtl_nic/rtl8168f-1.fw firmware: rtl_nic/rtl8105e-1.fw firmware: rtl_nic/rtl8168e-3.fw firmware: rtl_nic/rtl8168e-2.fw firmware: rtl_nic/rtl8168e-1.fw firmware: rtl_nic/rtl8168d-2.fw firmware: rtl_nic/rtl8168d-1.fw license: GPL softdep: pre: realtek description: RealTek RTL-8169 Gigabit Ethernet driver author: Realtek and the Linux r8169 crew netdev@vger.kernel.org srcversion: 7B2A906F183547A76B99090 alias: pci:v00000001d00008168svsd00002410bcsci alias: pci:v00001737d00001032svsd00000024bcsci alias: pci:v000016ECd00000116svsdbcsci alias: pci:v00001259d0000C107svsdbcsci alias: pci:v00001186d00004302svsdbcsci alias: pci:v00001186d00004300svsdbcsci alias: pci:v00001186d00004300sv00001186sd00004B10bcsci alias: pci:v000010ECd00008169svsdbcsci alias: pci:v000010FFd00008168svsdbcsci alias: pci:v000010ECd00008168svsdbcsci alias: pci:v000010ECd00008167svsdbcsci alias: pci:v000010ECd00008161svsdbcsci alias: pci:v000010ECd00008136svsdbcsci alias: pci:v000010ECd00008129svsdbcsci alias: pci:v000010ECd00002600svsdbcsci alias: pci:v000010ECd00002502svsdbcsci depends:
retpoline: Y intree: Y name: r8169 vermagic: 5.3.0-46-generic SMP mod_unload signat: PKCS#7 signer:
sig_key:
sig_hashalgo: md4 parm: debug:Debug verbosity level (0=none, ..., 16=all) (int)

~$ dmesg | grep r8169 [ 1.944491] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.944681] r8169 0000:03:00.0: unknown chip XID fcf

$ lspci -nn | grep RTL810xE 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 07)

maurizio@maurizio-SATELLITE-NB10-A-102:~$ sudo modprobe r8169 [sudo] password di maurizio: maurizio@maurizio-SATELLITE-NB10-A-102:~$ sudo modprobe r8169 maurizio@maurizio-SATELLITE-NB10-A-102:~$ dmesg [ 0.000000] Linux version 5.3.0-46-generic (buildd@lcy01-amd64-013) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #38~18.04.1-Ubuntu SMP Tue Mar 31 04:17:56 UTC 2020 (Ubuntu 5.3.0-46.38~18.04.1-generic 5.3.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=ee94715c-3a58-48b1-b448-2b962306315a ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b8a70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b8a71000-0x00000000b8aa0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8aa1000-0x00000000b8ac4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b8ac5000-0x00000000b9204fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9205000-0x00000000b9b5efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9b5f000-0x00000000b9b5ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9b60000-0x00000000b9ba1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9ba2000-0x00000000b9d08fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9d09000-0x00000000b9ff6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9ff7000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xaa70b018-0xaa71b057] usable ==> usable [ 0.000000] e820: update [mem 0xaa70b018-0xaa71b057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000020100000-0x00000000aa70b017] usable [ 0.000000] reserve setup_data: [mem 0x00000000aa70b018-0x00000000aa71b057] usable [ 0.000000] reserve setup_data: [mem 0x00000000aa71b058-0x00000000b8a70fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b8a71000-0x00000000b8aa0fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b8aa1000-0x00000000b8ac4fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000b8ac5000-0x00000000b9204fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000b9205000-0x00000000b9b5efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9b5f000-0x00000000b9b5ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b9b60000-0x00000000b9ba1fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9ba2000-0x00000000b9d08fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b9d09000-0x00000000b9ff6fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9ff7000-0x00000000b9ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xb9b06398 ACPI 2.0=0xb8aa8000 ACPI=0xb8aa8000 SMBIOS=0xb953ea98 MPS=0xb9b07a18 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: TOSHIBA SATELLITE NB10-A-102/MA10, BIOS 1.70 09/10/2014 [ 0.000000] tsc: Detected 1999.200 MHz processor [ 0.000031] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000048] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000054] MTRR default type: uncachable [ 0.000056] MTRR fixed ranges enabled: [ 0.000058] 00000-9FFFF write-back [ 0.000061] A0000-FFFFF uncachable [ 0.000063] MTRR variable ranges enabled: [ 0.000066] 0 base 000000000 mask F80000000 write-back [ 0.000069] 1 base 080000000 mask FC0000000 write-back [ 0.000072] 2 base 0BA000000 mask FFE000000 uncachable [ 0.000074] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000077] 4 base 100000000 mask FC0000000 write-back [ 0.000078] 5 disabled [ 0.000080] 6 disabled [ 0.000081] 7 disabled [ 0.000175] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000289] total RAM covered: 4000M [ 0.001516] Found optimal setting for mtrr clean up [ 0.001519] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G [ 0.001592] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved [ 0.001599] last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.008330] esrt: Reserving ESRT space from 0x00000000b9b06398 to 0x00000000b9b063d0. [ 0.008350] check: Scanning 1 areas for low memory corruption [ 0.008362] BRK [0x4a601000, 0x4a601fff] PGTABLE [ 0.008366] BRK [0x4a602000, 0x4a602fff] PGTABLE [ 0.008369] BRK [0x4a603000, 0x4a603fff] PGTABLE [ 0.008441] BRK [0x4a604000, 0x4a604fff] PGTABLE [ 0.008445] BRK [0x4a605000, 0x4a605fff] PGTABLE [ 0.008860] BRK [0x4a606000, 0x4a606fff] PGTABLE [ 0.008925] BRK [0x4a607000, 0x4a607fff] PGTABLE [ 0.009030] BRK [0x4a608000, 0x4a608fff] PGTABLE [ 0.009134] RAMDISK: [mem 0x3d874000-0x3fffdfff] [ 0.009149] ACPI: Early table checksum verification disabled [ 0.009155] ACPI: RSDP 0x00000000B8AA8000 000024 (v02 TOSASU) [ 0.009162] ACPI: XSDT 0x00000000B8AA8088 00008C (v01 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.009173] ACPI: FACP 0x00000000B8AC3A70 00010C (v05 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.009183] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190703/tbfadt-569) [ 0.009191] ACPI: DSDT 0x00000000B8AA81A0 01B8CA (v02 TOSASU TOSASU00 01072009 INTL 20120913) [ 0.009199] ACPI: FACS 0x00000000B9203F80 000040 [ 0.009205] ACPI: APIC 0x00000000B8AC3B80 000084 (v03 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.009212] ACPI: FPDT 0x00000000B8AC3C08 000044 (v01 TOSASU TOSASU00 01072009 AMI 00010013) [ 0.009219] ACPI: SLIC 0x00000000B8AC3C50 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001) [ 0.009226] ACPI: MSDM 0x00000000B8AC3DC8 000055 (v03 TOSASU TOSASU00 06222004 MSFT 00010013) [ 0.009233] ACPI: MCFG 0x00000000B8AC3E20 00003C (v01 TOSASU TOSASU00 01072009 MSFT 00000097) [ 0.009240] ACPI: LPIT 0x00000000B8AC3E60 000104 (v01 TOSASU TOSASU00 00000003 VLV2 0100000D) [ 0.009247] ACPI: HPET 0x00000000B8AC3F68 000038 (v01 TOSASU TOSASU00 01072009 AMI. 00000005) [ 0.009255] ACPI: SSDT 0x00000000B8AC3FA0 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.009262] ACPI: SSDT 0x00000000B8AC4708 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.009269] ACPI: SSDT 0x00000000B8AC4998 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.009276] ACPI: UEFI 0x00000000B8AC4B18 000042 (v01 TOSASU TOSASU00 00000000 00000000) [ 0.009284] ACPI: BGRT 0x00000000B8AC4B60 000038 (v00 00000000 MSFT 00000001) [ 0.009302] ACPI: Local APIC address 0xfee00000 [ 0.009506] No NUMA configuration found [ 0.009509] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.009528] NODE_DATA(0) allocated [mem 0x13ffd1000-0x13fffbfff] [ 0.010199] Zone ranges: [ 0.010201] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010205] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010207] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.010209] Device empty [ 0.010211] Movable zone start for each node [ 0.010219] Early memory node ranges [ 0.010221] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.010223] node 0: [mem 0x0000000000090000-0x000000000009dfff] [ 0.010225] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.010227] node 0: [mem 0x0000000020100000-0x00000000b8a70fff] [ 0.010230] node 0: [mem 0x00000000b9b5f000-0x00000000b9b5ffff] [ 0.010231] node 0: [mem 0x00000000b9ba2000-0x00000000b9d08fff] [ 0.010233] node 0: [mem 0x00000000b9ff7000-0x00000000b9ffffff] [ 0.010235] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.010842] Zeroed struct page in unavailable ranges: 30082 pages [ 0.010845] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.010850] On node 0 totalpages: 1018494 [ 0.010853] DMA zone: 64 pages used for memmap [ 0.010854] DMA zone: 21 pages reserved [ 0.010856] DMA zone: 3996 pages, LIFO batch:0 [ 0.010987] DMA32 zone: 11756 pages used for memmap [ 0.010990] DMA32 zone: 752354 pages, LIFO batch:63 [ 0.037573] Normal zone: 4096 pages used for memmap [ 0.037575] Normal zone: 262144 pages, LIFO batch:63 [ 0.045452] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.045463] Reserving Intel graphics memory at [mem 0xbb000000-0xbeffffff] [ 0.045593] ACPI: PM-Timer IO Port: 0x408 [ 0.045599] ACPI: Local APIC address 0xfee00000 [ 0.045616] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xfc]) [ 0.045617] ACPI: NMI not connected to LINT 1! [ 0.045619] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x29]) [ 0.045621] ACPI: NMI not connected to LINT 1! [ 0.045623] ACPI: LAPIC_NMI (acpi_id[0x03] low level lint[0x3b]) [ 0.045624] ACPI: NMI not connected to LINT 1! [ 0.045626] ACPI: LAPIC_NMI (acpi_id[0x04] dfl edge lint[0xc9]) [ 0.045627] ACPI: NMI not connected to LINT 1! [ 0.045643] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.045647] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.045651] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.045654] ACPI: IRQ0 used by override. [ 0.045657] ACPI: IRQ9 used by override. [ 0.045661] Using ACPI (MADT) for SMP configuration information [ 0.045665] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.045683] e820: update [mem 0xb7175000-0xb71a0fff] usable ==> reserved [ 0.045702] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.045748] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.045753] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.045757] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.045758] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.045763] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.045767] PM: Registered nosave memory: [mem 0xaa70b000-0xaa70bfff] [ 0.045771] PM: Registered nosave memory: [mem 0xaa71b000-0xaa71bfff] [ 0.045775] PM: Registered nosave memory: [mem 0xb7175000-0xb71a0fff] [ 0.045780] PM: Registered nosave memory: [mem 0xb8a71000-0xb8aa0fff] [ 0.045781] PM: Registered nosave memory: [mem 0xb8aa1000-0xb8ac4fff] [ 0.045783] PM: Registered nosave memory: [mem 0xb8ac5000-0xb9204fff] [ 0.045785] PM: Registered nosave memory: [mem 0xb9205000-0xb9b5efff] [ 0.045789] PM: Registered nosave memory: [mem 0xb9b60000-0xb9ba1fff] [ 0.045793] PM: Registered nosave memory: [mem 0xb9d09000-0xb9ff6fff] [ 0.045798] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff] [ 0.045800] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff] [ 0.045801] PM: Registered nosave memory: [mem 0xbf000000-0xfed00fff] [ 0.045803] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.045805] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff] [ 0.045806] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.045810] [mem 0xbf000000-0xfed00fff] available for PCI devices [ 0.045813] Booting paravirtualized kernel on bare hardware [ 0.045819] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.045836] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.046789] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.046808] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=12097152 [ 0.046811] pcpu-alloc: [0] 0 1 2 3 [ 0.046888] Built 1 zonelists, mobility grouping on. Total pages: 1002557 [ 0.046890] Policy zone: Normal [ 0.046894] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID=ee94715c-3a58-48b1-b448-2b962306315a ro quiet splash vt.handoff=1 [ 0.048306] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.048981] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.049056] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.070877] Calgary: detecting Calgary via BIOS EBDA area [ 0.070880] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.100749] Memory: 3631824K/4073976K available (14339K kernel code, 2369K rwdata, 4664K rodata, 2660K init, 5076K bss, 442152K reserved, 0K cma-reserved) [ 0.101175] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.101205] Kernel/User page tables isolation: enabled [ 0.101238] ftrace: allocating 43282 entries in 170 pages [ 0.127338] rcu: Hierarchical RCU implementation. [ 0.127342] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.127344] Tasks RCU enabled. [ 0.127346] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.127347] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.136287] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.136764] random: crng done (trusting CPU's manufacturer) [ 0.136821] vt handoff: transparent VT on vt#1 [ 0.136836] Console: colour dummy device 80x25 [ 0.136844] printk: console [tty0] enabled [ 0.136886] ACPI: Core revision 20190703 [ 0.137182] APIC: Switch to symmetric I/O mode setup [ 0.137828] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a275294b2, max_idle_ns: 881590412759 ns [ 0.137837] Calibrating delay loop (skipped), value calculated using timer frequency.. 3998.40 BogoMIPS (lpj=7996800) [ 0.137842] pid_max: default: 32768 minimum: 301 [ 0.141831] LSM: Security Framework initializing [ 0.141831] Yama: becoming mindful. [ 0.141831] AppArmor: AppArmor initialized [ 0.141831] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.141831] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.141831] VALIDATE proc [ 0.141831] VALIDATE cgroup1 [ 0.141831] VALIDATE cgroup2 [ 0.141831] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.141831] process: using mwait in idle threads [ 0.141831] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.141831] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.141831] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.141831] Spectre V2 : Mitigation: Full generic retpoline [ 0.141831] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.141831] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.141831] Freeing SMP alternatives memory: 40K [ 0.141831] TSC deadline timer enabled [ 0.141831] smpboot: CPU0: Intel(R) Pentium(R) CPU N3510 @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x3) [ 0.141831] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.141831] ... version: 3 [ 0.141831] ... bit width: 40 [ 0.141831] ... generic registers: 2 [ 0.141831] ... value mask: 000000ffffffffff [ 0.141831] ... max period: 0000007fffffffff [ 0.141831] ... fixed-purpose events: 3 [ 0.141831] ... event mask: 0000000700000003 [ 0.141831] rcu: Hierarchical SRCU implementation. [ 0.141831] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.141831] smp: Bringing up secondary CPUs ... [ 0.141831] x86: Booting SMP configuration: [ 0.141831] .... node #0, CPUs: #1 #2 #3 [ 0.143445] smp: Brought up 1 node, 4 CPUs [ 0.143445] smpboot: Max logical packages: 1 [ 0.143445] smpboot: Total of 4 processors activated (15993.60 BogoMIPS) [ 0.146409] devtmpfs: initialized [ 0.146409] x86/mm: Memory block size: 128MB [ 0.146409] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.146409] PM: Registering ACPI NVS region [mem 0xb8ac5000-0xb9204fff] (7602176 bytes) [ 0.146409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.146409] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.146409] pinctrl core: initialized pinctrl subsystem [ 0.146409] PM: RTC time: 15:00:29, date: 2020-04-17 [ 0.146409] NET: Registered protocol family 16 [ 0.146409] audit: initializing netlink subsys (disabled) [ 0.146409] audit: type=2000 audit(1587135629.008:1): state=initialized audit_enabled=0 res=1 [ 0.150079] EISA bus registered [ 0.150101] cpuidle: using governor ladder [ 0.150113] cpuidle: using governor menu [ 0.150239] ACPI: bus type PCI registered [ 0.150242] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.150417] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.150423] PCI: not using MMCONFIG [ 0.150425] PCI: Using configuration type 1 for base access [ 0.150946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.154467] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.162104] ACPI: Added _OSI(Module Device) [ 0.162107] ACPI: Added _OSI(Processor Device) [ 0.162108] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.162110] ACPI: Added _OSI(Processor Aggregator Device) [ 0.162113] ACPI: Added _OSI(Linux-Dell-Video) [ 0.162115] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.162117] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.211807] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.217789] ACPI: Dynamic OEM Table Load: [ 0.217789] ACPI: SSDT 0xFFFF8DF7BABBE800 0003F5 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.220277] ACPI: Dynamic OEM Table Load: [ 0.220287] ACPI: SSDT 0xFFFF8DF7BABBCC00 0003C7 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.223908] ACPI: Dynamic OEM Table Load: [ 0.223918] ACPI: SSDT 0xFFFF8DF7BA99E600 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.226507] ACPI: Dynamic OEM Table Load: [ 0.226516] ACPI: SSDT 0xFFFF8DF7BB321600 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.233150] ACPI: Interpreter enabled [ 0.233202] ACPI: (supports S0 S3 S4 S5) [ 0.233205] ACPI: Using IOAPIC for interrupt routing [ 0.233298] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.235067] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.235104] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.236462] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.249755] ACPI: Power Resource [USBC] (on) [ 0.253640] ACPI: Power Resource [PLPE] (on) [ 0.254463] ACPI: Power Resource [PLPE] (on) [ 0.266363] ACPI: Power Resource [CLK0] (off) [ 0.266486] ACPI: Power Resource [CLK1] (off) [ 0.274698] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.274711] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.275105] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.276485] PCI host bridge to bus 0000:00 [ 0.276490] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.276493] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.276496] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.276499] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.276502] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.276505] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.276507] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.276510] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xe00ffffe window] [ 0.276514] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.276535] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.276836] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.276852] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff] [ 0.276863] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.276874] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087] [ 0.276897] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.277177] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.277199] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077] [ 0.277209] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063] [ 0.277219] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057] [ 0.277228] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043] [ 0.277237] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f] [ 0.277247] pci 0000:00:13.0: reg 0x24: [mem 0xc0815000-0xc08157ff] [ 0.277299] pci 0000:00:13.0: PME# supported from D3hot [ 0.277557] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.277579] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit] [ 0.277645] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.277914] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.277945] pci 0000:00:1a.0: reg 0x10: [mem 0xc0500000-0xc05fffff] [ 0.277959] pci 0000:00:1a.0: reg 0x14: [mem 0xc0400000-0xc04fffff] [ 0.278067] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.278334] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.278361] pci 0000:00:1b.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit] [ 0.278438] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.278694] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.278776] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.279033] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.279115] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.279390] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.279471] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.279740] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.280064] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.280108] pci 0000:00:1f.3: reg 0x10: [mem 0xc0814000-0xc081401f] [ 0.280179] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.280643] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.280811] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 [ 0.280844] pci 0000:02:00.0: reg 0x10: [mem 0xc0700000-0xc077ffff 64bit] [ 0.280882] pci 0000:02:00.0: reg 0x30: [mem 0xc0780000-0xc078ffff pref] [ 0.280968] pci 0000:02:00.0: supports D1 D2 [ 0.280971] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.281154] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.281161] pci 0000:00:1c.1: bridge window [mem 0xc0700000-0xc07fffff] [ 0.281320] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.281351] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.281380] pci 0000:03:00.0: reg 0x18: [mem 0xe0004000-0xe0004fff 64bit pref] [ 0.281398] pci 0000:03:00.0: reg 0x20: [mem 0xe0000000-0xe0003fff 64bit pref] [ 0.281411] pci 0000:03:00.0: reg 0x30: [mem 0xc0600000-0xc060ffff pref] [ 0.281512] pci 0000:03:00.0: supports D1 D2 [ 0.281515] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.281715] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.281720] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.281724] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc06fffff] [ 0.281730] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.298394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.298656] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.298914] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299174] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299441] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299962] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.300221] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.309978] SCSI subsystem initialized [ 0.310056] libata version 3.00 loaded. [ 0.310056] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.310056] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.310056] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.310056] vgaarb: loaded [ 0.310056] ACPI: bus type USB registered [ 0.310056] usbcore: registered new interface driver usbfs [ 0.310056] usbcore: registered new interface driver hub [ 0.310056] usbcore: registered new device driver usb [ 0.310100] pps_core: LinuxPPS API ver. 1 registered [ 0.310102] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.310108] PTP clock support registered [ 0.310157] EDAC MC: Ver: 3.0.0 [ 0.310157] Registered efivars operations [ 0.310157] PCI: Using ACPI for IRQ routing [ 0.313036] PCI: pci_cache_line_size set to 64 bytes [ 0.313047] pci 0000:00:1c.2: can't claim BAR 15 [mem 0xe0000000-0xe00fffff 64bit pref]: no compatible bridge window [ 0.313051] pci 0000:00:1c.2: [mem 0xe0000000-0xe00fffff 64bit pref] clipped to [mem 0xe0000000-0xe00ffffe 64bit pref] [ 0.313056] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe00ffffe 64bit pref] [ 0.313103] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.313105] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.313107] e820: reserve RAM buffer [mem 0xaa70b018-0xabffffff] [ 0.313109] e820: reserve RAM buffer [mem 0xb7175000-0xb7ffffff] [ 0.313111] e820: reserve RAM buffer [mem 0xb8a71000-0xbbffffff] [ 0.313113] e820: reserve RAM buffer [mem 0xb9b60000-0xbbffffff] [ 0.313115] e820: reserve RAM buffer [mem 0xb9d09000-0xbbffffff] [ 0.313117] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 0.313839] NetLabel: Initializing [ 0.313839] NetLabel: domain hash size = 128 [ 0.313839] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.313839] NetLabel: unlabeled traffic allowed by default [ 0.317838] clocksource: Switched to clocksource tsc-early [ 0.348985] VFS: Disk quotas dquot_6.6.0 [ 0.349021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.349087] VALIDATE hugetlbfs [ 0.349289] AppArmor: AppArmor Filesystem Enabled [ 0.349351] pnp: PnP ACPI init [ 0.349494] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.349869] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.349873] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.349876] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.349879] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.349891] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350153] system 00:02: [mem 0xfe000380-0xfe00087f] has been reserved [ 0.350164] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350273] system 00:03: [io 0x0240-0x0259] has been reserved [ 0.350284] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.350438] pnp 00:04: Plug and Play ACPI device, IDs TOS1103 PNPc030 PNP0303 (active) [ 0.350658] pnp 00:05: Plug and Play ACPI device, IDs TOS0340 PNP0f13 (active) [ 0.351455] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.351460] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.351463] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.351466] system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.351470] system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.351473] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.351476] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.351479] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.351483] system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.351493] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.366690] pnp: PnP ACPI: found 7 devices [ 0.371278] thermal_sys: Registered thermal governor 'fair_share' [ 0.371280] thermal_sys: Registered thermal governor 'bang_bang' [ 0.371282] thermal_sys: Registered thermal governor 'step_wise' [ 0.371284] thermal_sys: Registered thermal governor 'user_space' [ 0.371285] thermal_sys: Registered thermal governor 'power_allocator' [ 0.375842] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.375933] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.375939] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.375943] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.375947] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.375957] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.375974] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0900000-0xc0afffff] [ 0.375984] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0b00000-0xc0cfffff 64bit pref] [ 0.375993] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0d00000-0xc0efffff 64bit pref] [ 0.375999] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.376004] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.376010] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.376015] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.376021] pci 0000:00:1c.0: bridge window [mem 0xc0900000-0xc0afffff] [ 0.376025] pci 0000:00:1c.0: bridge window [mem 0xc0b00000-0xc0cfffff 64bit pref] [ 0.376031] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.376035] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.376040] pci 0000:00:1c.1: bridge window [mem 0xc0700000-0xc07fffff] [ 0.376044] pci 0000:00:1c.1: bridge window [mem 0xc0d00000-0xc0efffff 64bit pref] [ 0.376050] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.376054] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.376058] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc06fffff] [ 0.376062] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe00ffffe 64bit pref] [ 0.376069] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.376072] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.376075] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.376077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.376080] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.376083] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.376086] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.376088] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xe00ffffe window] [ 0.376092] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.376094] pci_bus 0000:01: resource 1 [mem 0xc0900000-0xc0afffff] [ 0.376097] pci_bus 0000:01: resource 2 [mem 0xc0b00000-0xc0cfffff 64bit pref] [ 0.376100] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.376103] pci_bus 0000:02: resource 1 [mem 0xc0700000-0xc07fffff] [ 0.376105] pci_bus 0000:02: resource 2 [mem 0xc0d00000-0xc0efffff 64bit pref] [ 0.376108] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.376111] pci_bus 0000:03: resource 1 [mem 0xc0600000-0xc06fffff] [ 0.376114] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe00ffffe 64bit pref] [ 0.376399] NET: Registered protocol family 2 [ 0.376706] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.376788] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.376997] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.377148] TCP: Hash tables configured (established 32768 bind 32768) [ 0.377259] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.377315] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.377554] NET: Registered protocol family 1 [ 0.377571] NET: Registered protocol family 44 [ 0.377594] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.378099] PCI: CLS 64 bytes, default 64 [ 0.378220] Trying to unpack rootfs image as initramfs... [ 1.375039] Freeing initrd memory: 40488K [ 1.375114] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.375119] software IO TLB: mapped [mem 0xa6709000-0xaa709000] (64MB) [ 1.375216] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a275294b2, max_idle_ns: 881590412759 ns [ 1.375249] clocksource: Switched to clocksource tsc [ 1.375415] check: Scanning for low memory corruption every 60 seconds [ 1.378780] Initialise system trusted keyrings [ 1.378801] Key type blacklist registered [ 1.378897] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.382538] zbud: loaded [ 1.383498] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.383930] fuse: init (API version 7.31) [ 1.384213] Platform Keyring initialized [ 1.392568] Key type asymmetric registered [ 1.392571] Asymmetric key parser 'x509' registered [ 1.392600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.392718] io scheduler mq-deadline registered [ 1.394045] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.394195] efifb: probing for efifb [ 1.394237] efifb: Ignoring BGRT: unexpected or invalid BMP data [ 1.394240] efifb: framebuffer at 0xd0000000, using 1876k, total 1875k [ 1.394242] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 1.394243] efifb: scrolling: redraw [ 1.394246] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.394351] fbcon: Deferring console take-over [ 1.394353] fb0: EFI VGA frame buffer device [ 1.394372] intel_idle: MWAIT substates: 0x33000020 [ 1.394374] intel_idle: v0.4.1 model 0x37 [ 1.394856] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.395237] ACPI: AC Adapter [AC0] (on-line) [ 1.395381] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input0 [ 1.395411] ACPI: Lid Switch [LID] [ 1.395489] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.395505] ACPI: Power Button [SLPB] [ 1.395578] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.395599] ACPI: Power Button [PWRF] [ 1.427799] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.427803] ACPI: Thermal Zone [THRM] (45 C) [ 1.429154] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.449601] hpet: number irqs doesn't agree with number of timers [ 1.449789] Linux agpgart interface v0.103 [ 1.462085] loop: module loaded [ 1.463120] libphy: Fixed MDIO Bus: probed [ 1.463123] tun: Universal TUN/TAP device driver, 1.6 [ 1.464122] PPP generic driver version 2.4.2 [ 1.465188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.465203] ehci-pci: EHCI PCI platform driver [ 1.465247] ehci-platform: EHCI generic platform driver [ 1.465270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.465276] ohci-pci: OHCI PCI platform driver [ 1.465294] ohci-platform: OHCI generic platform driver [ 1.465309] uhci_hcd: USB Universal Host Controller Interface driver [ 1.465663] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.465676] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.466758] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.466765] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.467057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.467061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.467063] usb usb1: Product: xHCI Host Controller [ 1.467066] usb usb1: Manufacturer: Linux 5.3.0-46-generic xhci-hcd [ 1.467068] usb usb1: SerialNumber: 0000:00:14.0 [ 1.468354] hub 1-0:1.0: USB hub found [ 1.468376] hub 1-0:1.0: 6 ports detected [ 1.469542] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.469555] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.469563] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.469673] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 1.469677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.469680] usb usb2: Product: xHCI Host Controller [ 1.469682] usb usb2: Manufacturer: Linux 5.3.0-46-generic xhci-hcd [ 1.469685] usb usb2: SerialNumber: 0000:00:14.0 [ 1.471137] hub 2-0:1.0: USB hub found [ 1.471157] hub 2-0:1.0: 1 port detected [ 1.471615] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.480227] i8042: Detected active multiplexing controller, rev 1.1 [ 1.482257] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.482268] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.482332] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.482388] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.482443] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.484589] mousedev: PS/2 mouse device common for all mice [ 1.487249] rtc_cmos 00:00: RTC can wake from S4 [ 1.487973] rtc_cmos 00:00: registered as rtc0 [ 1.488017] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 1.488036] i2c /dev entries driver [ 1.488145] device-mapper: uevent: version 1.0.3 [ 1.488779] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 1.488833] platform eisa.0: Probing EISA bus 0 [ 1.488837] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.488840] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.488843] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.488845] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.488848] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.488850] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.488853] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.488855] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.488858] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.488860] platform eisa.0: EISA: Detected 0 cards [ 1.488868] intel_pstate: Intel P-state driver initializing [ 1.490041] ledtrig-cpu: registered to indicate activity on CPUs [ 1.490047] EFI Variables Facility v0.08 2004-May-17 [ 1.495612] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.499985] NET: Registered protocol family 10 [ 1.501454] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.521361] Segment Routing with IPv6 [ 1.521408] NET: Registered protocol family 17 [ 1.521612] Key type dns_resolver registered [ 1.523022] RAS: Correctable Errors collector initialized. [ 1.523218] microcode: sig=0x30673, pf=0x8, revision=0x320 [ 1.523800] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.523803] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 1.524003] microcode: Microcode Update Driver: v2.2. [ 1.524026] sched_clock: Marking stable (1522797233, 1193722)->(1543988318, -19997363) [ 1.525248] registered taskstats version 1 [ 1.525268] Loading compiled-in X.509 certificates [ 1.529903] Loaded X.509 cert 'Build time autogenerated kernel key: 5650732eee8a3c09a605a6628308b9d1fc90aa8a' [ 1.529993] zswap: loaded using pool lzo/zbud [ 1.549220] Key type big_key registered [ 1.558301] Key type encrypted registered [ 1.558313] AppArmor: AppArmor sha1 policy hashing enabled [ 1.559017] ima: No TPM chip found, activating TPM-bypass! [ 1.559031] ima: Allocated hash algorithm: sha1 [ 1.559045] No architecture policies found [ 1.559083] evm: Initialising EVM extended attributes: [ 1.559084] evm: security.selinux [ 1.559086] evm: security.SMACK64 [ 1.559087] evm: security.SMACK64EXEC [ 1.559088] evm: security.SMACK64TRANSMUTE [ 1.559088] evm: security.SMACK64MMAP [ 1.559089] evm: security.apparmor [ 1.559090] evm: security.ima [ 1.559091] evm: security.capability [ 1.559093] evm: HMAC attrs: 0x1 [ 1.560063] PM: Magic number: 0:816:32 [ 1.560727] rtc_cmos 00:00: setting system clock to 2020-04-17T15:00:30 UTC (1587135630) [ 1.581008] Freeing unused decrypted memory: 2040K [ 1.582881] Freeing unused kernel image memory: 2660K [ 1.602666] Write protecting the kernel read-only data: 22528k [ 1.605041] Freeing unused kernel image memory: 2008K [ 1.606433] Freeing unused kernel image memory: 1480K [ 1.636516] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.637098] x86/mm: Checking user space page tables [ 1.666150] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.666155] Run /init as init process [ 1.727427] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.727431] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 1.805901] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.827751] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 1.827755] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.827758] usb 1-2: Product: USB2.0 Hub [ 1.828987] hub 1-2:1.0: USB hub found [ 1.829282] hub 1-2:1.0: 4 ports detected [ 1.923081] hidraw: raw HID events driver (C) Jiri Kosina [ 1.931242] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 1.931246] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 1.957887] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 1.975851] ahci 0000:00:13.0: version 3.0 [ 1.981284] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.981484] r8169 0000:03:00.0: unknown chip XID fcf [ 1.986386] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 1.986391] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm apst [ 1.987538] scsi host0: ahci [ 1.988505] scsi host1: ahci [ 1.988670] ata1: SATA max UDMA/133 abar m2048@0xc0815000 port 0xc0815100 irq 91 [ 1.988672] ata2: DUMMY [ 2.003509] usb 1-3: New USB device found, idVendor=04f2, idProduct=b3b1, bcdDevice=57.36 [ 2.003513] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.003516] usb 1-3: Product: TOSHIBA Web Camera - HD [ 2.003519] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd. [ 2.003521] usb 1-3: SerialNumber: 0x0001 [ 2.135961] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 2.135965] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 2.138397] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 2.288125] usb 1-4: New USB device found, idVendor=0930, idProduct=0220, bcdDevice= 0.01 [ 2.288140] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.305659] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.332711] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM003M, max UDMA/100 [ 2.332725] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.336051] ata1.00: configured for UDMA/100 [ 2.337416] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 3M PQ: 0 ANSI: 5 [ 2.338376] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.338644] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.338686] sd 0:0:0:0: [sda] Write Protect is off [ 2.338690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.338747] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.349726] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 2.349740] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 2.366407] usb 1-2.2: new low-speed USB device number 5 using xhci_hcd [ 2.451016] sda: sda1 sda2 sda3 [ 2.454317] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.552356] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0). [ 2.552360] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known. [ 2.554290] usb 1-2.2: New USB device found, idVendor=0e8f, idProduct=00a7, bcdDevice= 3.11 [ 2.554295] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.554298] usb 1-2.2: Product: 2.4G RX [ 2.554300] usb 1-2.2: Manufacturer: DaKai [ 2.642262] usb 1-2.3: new high-speed USB device number 6 using xhci_hcd [ 2.666867] usb 1-2.3: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00 [ 2.666882] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.666893] usb 1-2.3: Product: Flash Card Reader/Writer [ 2.666903] usb 1-2.3: Manufacturer: Generic [ 2.666912] usb 1-2.3: SerialNumber: 058F63666485 [ 2.689597] usb-storage 1-2.3:1.0: USB Mass Storage device detected [ 2.689876] scsi host2: usb-storage 1-2.3:1.0 [ 2.690053] usbcore: registered new interface driver usb-storage [ 2.691902] usbcore: registered new interface driver usbhid [ 2.691904] usbhid: USB HID core driver [ 2.693250] usbcore: registered new interface driver uas [ 2.697509] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:0E8F:00A7.0001/input/input11 [ 2.755593] hid-generic 0003:0E8F:00A7.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:14.0-2.2/input0 [ 2.756114] input: DaKai 2.4G RX Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E8F:00A7.0002/input/input13 [ 2.758047] input: DaKai 2.4G RX System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E8F:00A7.0002/input/input14 [ 2.818985] input: DaKai 2.4G RX Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E8F:00A7.0002/input/input15 [ 2.819343] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E8F:00A7.0002/input/input16 [ 2.819839] input: DaKai 2.4G RX Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:0E8F:00A7.0002/input/input17 [ 2.820874] hid-generic 0003:0E8F:00A7.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:14.0-2.2/input1 [ 3.294379] fbcon: Taking over console [ 3.294549] Console: switching to colour frame buffer device 100x37 [ 3.381648] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.511260] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680] [ 3.584755] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762 [ 3.632178] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 3.720275] scsi 2:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4 [ 3.721694] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.723571] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 5.012892] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.031109] systemd[1]: Detected architecture x86-64. [ 5.046504] systemd[1]: Set hostname to <maurizio-satellite-nb10-a-102>. [ 6.887832] systemd[1]: Created slice User and Session Slice. [ 6.888062] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.888104] systemd[1]: Reached target Remote File Systems. [ 6.888140] systemd[1]: Reached target User and Group Name Lookups. [ 6.888593] systemd[1]: Created slice System Slice. [ 6.888946] systemd[1]: Listening on Journal Audit Socket. [ 6.889154] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.070468] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.373912] lp: driver loaded but no devices found [ 7.382387] ppdev: user-space parallel port driver [ 7.532376] systemd-journald[321]: Received request to flush runtime journal from PID 1 [ 7.538002] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 9.934837] Bluetooth: Core ver 2.22 [ 9.934874] NET: Registered protocol family 31 [ 9.934876] Bluetooth: HCI device and connection manager initialized [ 9.934882] Bluetooth: HCI socket layer initialized [ 9.934886] Bluetooth: L2CAP socket layer initialized [ 9.934894] Bluetooth: SCO socket layer initialized [ 9.960360] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver [ 10.066666] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A [ 10.066671] mei_txe 0000:00:1a.0: PCI INT A: not connected [ 10.187281] Bluetooth: HCI UART driver ver 2.3 [ 10.187285] Bluetooth: HCI UART protocol H4 registered [ 10.187286] Bluetooth: HCI UART protocol BCSP registered [ 10.187322] Bluetooth: HCI UART protocol LL registered [ 10.187324] Bluetooth: HCI UART protocol ATH3K registered [ 10.187344] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 10.187395] Bluetooth: HCI UART protocol Intel registered [ 10.187460] Bluetooth: HCI UART protocol Broadcom registered [ 10.187479] Bluetooth: HCI UART protocol QCA registered [ 10.187481] Bluetooth: HCI UART protocol AG6XX registered [ 10.187499] Bluetooth: HCI UART protocol Marvell registered [ 10.243515] checking generic (d0000000 1d5000) vs hw (d0000000 10000000) [ 10.243519] fb0: switching to inteldrmfb from EFI VGA [ 10.243670] Console: switching to colour dummy device 80x25 [ 10.243750] i915 0000:00:02.0: vgaarb: deactivate vga console [ 10.243882] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.243884] [drm] Driver supports precise vblank timestamp query. [ 10.245301] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.270232] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 10.270608] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.271472] usbcore: registered new interface driver btusb [ 10.283613] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24 [ 10.287616] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18 [ 10.304379] fbcon: i915drmfb (fb0) is primary device [ 10.304491] Console: switching to colour frame buffer device 170x48 [ 10.304534] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 10.420353] toshiba_acpi: WMI event detected, hotkeys will not be monitored [ 10.470139] usb 1-4: USB disconnect, device number 4 [ 10.470216] usbcore: registered new interface driver ath3k [ 10.572878] toshiba_acpi: Supported laptop features: touchpad special-function-keys panel-power-on usb3 cooling-method [ 10.644478] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.650322] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.793868] usb 1-4: new full-speed USB device number 7 using xhci_hcd [ 10.860213] cryptd: max_cpu_qlen set to 1000 [ 11.229307] ath9k 0000:02:00.0: enabling device (0000 -> 0002) [ 11.229560] ath: phy0: WB335 2-ANT card detected [ 11.229562] ath: phy0: Set BT/WLAN RX diversity capability [ 11.236695] ath: phy0: Enable LNA combining [ 11.237796] ath: EEPROM regdomain: 0x65 [ 11.237798] ath: EEPROM indicates we should expect a direct regpair map [ 11.237801] ath: Country alpha2 being used: 00 [ 11.237802] ath: Regpair used: 0x65 [ 11.240178] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.240935] ieee80211 phy0: Atheros AR9565 Rev:0 mem=0xffff9e6fc0c80000, irq=17 [ 11.586343] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 11.826100] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 [ 11.864943] intel_rapl_common: Found RAPL domain package [ 11.864948] intel_rapl_common: Found RAPL domain core [ 12.048791] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 12.048796] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.048799] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 12.048801] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.048803] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.048807] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 12.048809] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 12.100227] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 12.100375] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 12.100512] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 16.127145] usb 1-4: New USB device found, idVendor=0930, idProduct=0220, bcdDevice= 0.02 [ 16.127149] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 16.345293] mc: Linux media interface: v0.10 [ 16.360509] videodev: Linux video capture interface: v2.00 [ 17.609525] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b3b1) [ 17.615515] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized! [ 17.615520] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized! [ 17.615523] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized! [ 17.615709] input: TOSHIBA Web Camera - HD: TOSHIB as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input22 [ 17.615885] usbcore: registered new interface driver uvcvideo [ 17.615887] USB Video Class driver (1.1.1) [ 20.792894] audit: type=1400 audit(1587135649.728:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=608 comm="apparmor_parser" [ 20.795629] audit: type=1400 audit(1587135649.732:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=609 comm="apparmor_parser" [ 20.806085] audit: type=1400 audit(1587135649.744:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=610 comm="apparmor_parser" [ 20.806095] audit: type=1400 audit(1587135649.744:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=610 comm="apparmor_parser" [ 20.808932] audit: type=1400 audit(1587135649.744:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=611 comm="apparmor_parser" [ 20.832251] audit: type=1400 audit(1587135649.768:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=607 comm="apparmor_parser" [ 20.832262] audit: type=1400 audit(1587135649.768:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=607 comm="apparmor_parser" [ 20.832268] audit: type=1400 audit(1587135649.768:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=607 comm="apparmor_parser" [ 20.836607] audit: type=1400 audit(1587135649.772:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=613 comm="apparmor_parser" [ 20.845018] audit: type=1400 audit(1587135649.780:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=614 comm="apparmor_parser" [ 21.467804] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.467807] Bluetooth: BNEP filters: protocol multicast [ 21.467818] Bluetooth: BNEP socket layer initialized [ 25.990357] wlp2s0: authenticate with 10:13:31:1a:4d:1d [ 26.002404] wlp2s0: send auth to 10:13:31:1a:4d:1d (try 1/3) [ 26.004480] wlp2s0: authenticated [ 26.006109] wlp2s0: associate with 10:13:31:1a:4d:1d (try 1/3) [ 26.010173] wlp2s0: RX AssocResp from 10:13:31:1a:4d:1d (capab=0x411 status=0 aid=3) [ 26.010303] wlp2s0: associated [ 26.057648] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 31.675349] Bluetooth: RFCOMM TTY layer initialized [ 31.675362] Bluetooth: RFCOMM socket layer initialized [ 31.675374] Bluetooth: RFCOMM ver 1.11 [ 36.948325] rfkill: input handler disabled [ 62.248461] kauditd_printk_skb: 27 callbacks suppressed [ 62.248465] audit: type=1400 audit(1587135691.620:39): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=1506 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 62.253014] audit: type=1400 audit(1587135691.624:40): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=1506 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 62.260559] audit: type=1400 audit(1587135691.632:41): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=1506 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 62.261897] audit: type=1400 audit(1587135691.632:42): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=1506 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 62.272841] audit: type=1400 audit(1587135691.644:43): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/maurizio/.cache/mesa_shader_cache/index" pid=1506 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000 [ 62.274660] audit: type=1400 audit(1587135691.648:44): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=1506 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 64.783508] audit: type=1400 audit(1587135694.156:45): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/maurizio/.cache/fontconfig/158c65c810c0d352a587f5be66058e87-le64.cache-7" pid=1505 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000 maurizio@maurizio-SATELLITE-NB10-A-102:~$

Grazie SACARDE, Con Windows 8 la LAN ha sempre funzionato. Ecco i comandi che mi hai chiesto:

~$ ls -l /boot |grep vmlinuz -rw-r--r-- 1 root root 8707832 apr 15 22:27 vmlinuz-5.0.0-23-generic -rw------- 1 root root 9146616 mar 31 04:43 vmlinuz-5.3.0-46-generic

$ sudo rmmod r8169 rmmod: ERROR: Module r8169 is not currently loaded

sleep 2 non mi da niente

~$ sudo modprobe -v r8169 insmod /lib/modules/5.3.0-46-generic/kernel/drivers/net/ethernet/realtek/r8169.ko

~$ dmesg | tail -10 [ 31.069843] wlp2s0: associate with 10:13:31:1a:4d:1d (try 1/3) [ 31.073959] wlp2s0: RX AssocResp from 10:13:31:1a:4d:1d (capab=0x411 status=0 aid=2) [ 31.074110] wlp2s0: associated [ 31.255141] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 48.711426] Bluetooth: RFCOMM TTY layer initialized [ 48.711442] Bluetooth: RFCOMM socket layer initialized [ 48.711454] Bluetooth: RFCOMM ver 1.11 [ 60.569489] rfkill: input handler disabled [ 634.264573] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 634.264782] r8169 0000:03:00.0: unknown chip XID fcf

Ciao SACARDE. Con Windows 8 la LAN ha sempre funzionato, con UBUNTU mi pare di no, ma non ricordo bene. Ho fatto esattamente come mi hai chiesto: maurizio@maurizio-SATELLITE-NB10-A-102:~$ ip a 1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlp2s0: <broadcast,multicast,up,lower_up> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 64:5a:04:b2:28:42 brd ff:ff:ff:ff:ff:ff inet 192.168.1.6/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0 valid_lft 21497sec preferred_lft 21497sec inet6 fe80::54fb:e8d4:c2ac:fc2a/64 scope link noprefixroute valid_lft forever preferred_lft forever

eseguito passo passo con noapic acpi=noirq. Risulta questo:

$ ip a 1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlp2s0: <broadcast,multicast,up,lower_up> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 64:5a:04:b2:28:42 brd ff:ff:ff:ff:ff:ff inet 192.168.1.6/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0 valid_lft 21561sec preferred_lft 21561sec inet6 fe80::54fb:e8d4:c2ac:fc2a/64 scope link noprefixroute valid_lft forever preferred_lft forever

Con la seconda modifica del kernel:

~$ ip a 1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlp2s0: <broadcast,multicast,up,lower_up> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 64:5a:04:b2:28:42 brd ff:ff:ff:ff:ff:ff inet 192.168.1.6/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0 valid_lft 21529sec preferred_lft 21529sec inet6 fe80::54fb:e8d4:c2ac:fc2a/64 scope link noprefixroute valid_lft forever preferred_lft forever

~$ ip a 1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlp2s0: <broadcast,multicast,up,lower_up> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 64:5a:04:b2:28:42 brd ff:ff:ff:ff:ff:ff inet 192.168.1.6/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0 valid_lft 21466sec preferred_lft 21466sec inet6 fe80::54fb:e8d4:c2ac:fc2a/64 scope link noprefixroute valid_lft forever preferred_lft forever

Prova dopo aver installato fwts:

maurizio@maurizio-SATELLITE-NB10-A-102:~$ sudo fwts aspm [sudo] password di maurizio: Running 1 tests, results appended to results.log Test: PCIe ASPM test.
PCIe ASPM ACPI test.
PCIe ASPM registers test. 2 passed, 8 warnings maurizio@maurizio-SATELLITE-NB10-A-102:~$ dmesg|egrep 'enp2s0|r8169' [ 1.972635] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.974932] r8169 0000:03:00.0: unknown chip XID fcf maurizio@maurizio-SATELLITE-NB10-A-102:~$ sudo ethtool -s enp2s0 speed 100 duplex full autoneg off sudo: ethtool: comando non trovato