PAVUCONTROL non rileva l'uscita usb del PC

Il pc è collegato con un cavo HDMI alla TV, ha sempre funzionato ma da un pò di tempo non funge, PAVUCONTROL inoltre non lo rileva proprio come uscita. E' collegata, tramite USB, una scheda audio esterna, la quale presenta una uscita mic e cuffie, le quali funzionano benissimo (essendo un sistema server, non era dotato di scheda audio purtroppo). Qualcuno sa darmi una spiegazione? Grazie! Posto le caratteristiche del sistema: System: Kernel: 5.8.0-49-generic x86_64 bits: 64 Desktop: Gnome 3.36.7 Distro: Ubuntu 20.04.2 LTS (Focal Fossa) Machine: Type: Desktop System: FUJITSU product: PRIMERGY TX100 S3P v: N/A serial: <filter> Mobo: FUJITSU model: D3009-B1 v: S26361-D3009-B1 serial: <filter> BIOS: FUJITSU // American Megatrends v: 4.6.5.3 R1.6.0 for D3009-B1x date: 05/18/2012 CPU: Topology: Quad Core model: Intel Xeon E3-1220 V2 bits: 64 type: MCP L2 cache: 8192 KiB Speed: 1726 MHz min/max: 1600/3500 MHz Core speeds (MHz): 1: 1705 2: 1681 3: 1670 4: 1687 Graphics: Device-1: NVIDIA GK208B [GeForce GT 710] driver: nvidia v: 450.102.04 Display: x11 server: X.Org 1.20.9 driver: nvidia unloaded: fbdev,modesetting,nouveau,vesa resolution: 1360x768~60Hz OpenGL: renderer: GeForce GT 710/PCIe/SSE2 v: 4.6.0 NVIDIA 450.102.04 Audio: Device-1: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel Device-2: C-Media Audio Adapter type: USB driver: hid-generic,snd-usb-audio,usbhid Sound Server: ALSA v: k5.8.0-49-generic Network: Device-1: Intel 82579LM Gigabit Network driver: e1000e IF: enp0s25 state: down mac: <filter> Device-2: Intel 82574L Gigabit Network driver: e1000e IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>

#ubuntu

chiesto 18 Apr '21, 12:44

Nero
30●2●4

hai fatto aggiornamenti? (kernel)
vedi errori dai messaggi:

journalctl -b -p err

(18 Apr '21, 14:04) sacarde

Una risposta:

più vecchie recenti popolari

Gli aggiornamenti li faccio regolarmente, uno giusto stamane e si deve riavviare, ma già la scorsa settimana c'era questo problema. Ho lanciato il codice che mi hai passato ed è uscita sta roba, :

-- Logs begin at Thu 2020-09-03 12:15:04 CEST, end at Sun 2021-04-18 15:10:56 C>
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor re>
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor re>
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor re>
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor re>
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: sd 6:0:0:0: [sdc] No Caching mo>
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: sd 6:0:0:0: [sdc] Assuming driv>
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1.2: device not accepting>
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1.2: device not accepting>
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1-port2: unable to enumer>
apr 15 14:59:43 nero-primergy-tx100-s3p gdm-password][1417]: gkr-pam: unable to>
apr 15 15:00:00 nero-primergy-tx100-s3p pulseaudio[1431]: GetManagedObjects() f>
apr 15 15:00:27 nero-primergy-tx100-s3p kernel: usb 2-1.2.2: unable to read con>
apr 15 15:00:27 nero-primergy-tx100-s3p kernel: usb 2-1.2.2: can't read configu>
apr 15 15:01:10 nero-primergy-tx100-s3p pulseaudio[1431]: Error opening PCM dev>
apr 15 15:01:10 nero-primergy-tx100-s3p kernel: usb 2-1.2.1: device descriptor >
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: hub 2-1.2:1.0: hub_ext_port_sta>
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (>
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (>
apr 15 15:01:12 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (>
apr 15 15:01:13 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (>
apr 15 15:01:13 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: Cannot enable.>
apr 15 15:01:14 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot disable>
apr 15 15:01:15 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (>
lines 2-24
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: sd 6:0:0:0: [sdc] No Caching mode page found
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: sd 6:0:0:0: [sdc] Assuming drive cache: write through
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1.2: device not accepting address 6, error -32
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1.2: device not accepting address 7, error -32
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1-port2: unable to enumerate USB device
apr 15 14:59:43 nero-primergy-tx100-s3p gdm-password][1417]: gkr-pam: unable to locate daemon control file
apr 15 15:00:00 nero-primergy-tx100-s3p pulseaudio[1431]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Fai>
apr 15 15:00:27 nero-primergy-tx100-s3p kernel: usb 2-1.2.2: unable to read config index 0 descriptor/all
apr 15 15:00:27 nero-primergy-tx100-s3p kernel: usb 2-1.2.2: can't read configurations, error -110
apr 15 15:01:10 nero-primergy-tx100-s3p pulseaudio[1431]: Error opening PCM device hw:1: File o directory non esistente
apr 15 15:01:10 nero-primergy-tx100-s3p kernel: usb 2-1.2.1: device descriptor read/64, error -32
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: hub 2-1.2:1.0: hub_ext_port_status failed (err = -71)
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -71)
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -71)
apr 15 15:01:12 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:13 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:13 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: Cannot enable. Maybe the USB cable is bad?
apr 15 15:01:14 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot disable (err = -110)
apr 15 15:01:15 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:16 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:17 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:18 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:20 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:20 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: Cannot enable. Maybe the USB cable is bad?
apr 15 15:01:21 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot disable (err = -110)
apr 15 15:01:22 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:23 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:24 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
lines 2-33
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: usb 2-1.2: device descriptor read/64, error -32
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: sd 6:0:0:0: [sdc] No Caching mode page found
apr 15 14:59:32 nero-primergy-tx100-s3p kernel: sd 6:0:0:0: [sdc] Assuming drive cache: write through
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1.2: device not accepting address 6, error -32
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1.2: device not accepting address 7, error -32
apr 15 14:59:33 nero-primergy-tx100-s3p kernel: usb 2-1-port2: unable to enumerate USB device
apr 15 14:59:43 nero-primergy-tx100-s3p gdm-password][1417]: gkr-pam: unable to locate daemon control file
apr 15 15:00:00 nero-primergy-tx100-s3p pulseaudio[1431]: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut>
apr 15 15:00:27 nero-primergy-tx100-s3p kernel: usb 2-1.2.2: unable to read config index 0 descriptor/all
apr 15 15:00:27 nero-primergy-tx100-s3p kernel: usb 2-1.2.2: can't read configurations, error -110
apr 15 15:01:10 nero-primergy-tx100-s3p pulseaudio[1431]: Error opening PCM device hw:1: File o directory non esistente
apr 15 15:01:10 nero-primergy-tx100-s3p kernel: usb 2-1.2.1: device descriptor read/64, error -32
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: hub 2-1.2:1.0: hub_ext_port_status failed (err = -71)
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -71)
apr 15 15:01:11 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -71)
apr 15 15:01:12 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:13 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:13 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: Cannot enable. Maybe the USB cable is bad?
apr 15 15:01:14 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot disable (err = -110)
apr 15 15:01:15 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:16 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:17 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:18 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:20 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
apr 15 15:01:20 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: Cannot enable. Maybe the USB cable is bad?
apr 15 15:01:21 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot disable (err = -110)
apr 15 15:01:22 nero-primergy-tx100-s3p kernel: usb 2-1.2-port1: cannot reset (err = -110)
lines 2-31

coll. permanente

ha risposto 18 Apr '21, 15:15

Nero
30●2●4

modificato 18 Apr '21, 15:15

hai aggiornato anche il kernel?

che vedi da: ls -l /boot | grep vmlinuz

(18 Apr '21, 17:29) sacarde

La tua risposta

abilita/disabilita anteprima

wiki

Segui questa domanda

Via email:

Una volta eseguito l'accesso potrai iscriverti a tutti gli aggiornamenti qui

Via RSS:

Risposte

Risposte e commenti

Basi di markdown

*corsivo* o __corsivo__
**grassetto** o __grassetto__
collegamento:[testo](http://url.com/ "titolo")
immagine?![alt testo](/path/img.jpg "titolo")
elenco numerato: 1. Foo 2. Bar
per aggiungere un'interruzione di riga, aggiungi due spazi a fine riga e premi «Invio»
è supportato anche semplice HTML

informazioni su markdown

Tag:

#ubuntu ×105

domanda posta: 18 Apr '21, 12:44

domanda visualizzata: 459 volte

ultimo aggiornamento: 18 Apr '21, 17:29

PAVUCONTROL non rileva l'uscita usb del PC

Segui questa domanda

Benvenuti!

Comunità

Domande correlate