Uscita audio HDMI non funzionante

0

Salve, quando collego la tv con hdmi funziona solo l'uscita video. Con alsamixer e pavucontrol non ho risolto, non viene proprio rilevato l'audio hdmi. In questo momento uso Ubuntu 20.1 ma lo stesso problema era presente anche in 20.04 Grazie

chiesto 04 May '21, 19:49

gab90's gravatar image

gab90
20●2●2●3

No :( Avevo già visto questa discussione, a me l'uscita hdmi non compare per nulla su pavucontrol

(05 May '21, 15:24) gab90 gab90's gravatar image

la scheda audio?

inxi -A

(05 May '21, 20:59) sacarde sacarde's gravatar image

Audio: Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel Sound Server: ALSA v: k5.8.0-50-generic

(06 May '21, 02:32) gab90 gab90's gravatar image

potrebbe essere un problema derivato dai driver grafici?

inxi -G

(06 May '21, 11:13) sacarde sacarde's gravatar image

Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] driver: i915 v: kernel Device-2: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa resolution: 1366x768~60Hz OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.2.6

(06 May '21, 16:20) gab90 gab90's gravatar image

  • non ha mai funzionato? con altri sistemi

  • che vedi da: dmesg | grep HDMI

systemctl --failed

journalctl -b -p err

dpkg -l | grep intel

sudo modinfo i915 | egrep -i "guc|huc|dmc"

p.s. https://wiki.ubuntu-it.org/Hardware/AbilitareDriverProprietari

p.s. https://forum.ubuntu-it.org/viewtopic.php?t=632690

(06 May '21, 17:47) sacarde sacarde's gravatar image

Su windows funziona

(06 May '21, 18:13) gab90 gab90's gravatar image
8 risposte:
più vecchierecentipopolari
0

sudo update-initramfs

Con update-initramfs -c -k all e update-initramfs -u -k all mi dà

libkmod: ERROR ../libkmod/libkmod-config.c:657 kmod_config_parse: /etc/modprobe.d/ath9k.conf line 1: ignoring bad line starting with 'ath9k'

in loop.

Non saprei fare altro

coll. permanente

ha risposto 14 May '21, 18:00

gab90's gravatar image

gab90
20●2●2●3

prova a togliere la prima riga dal file: /etc/modprobe.d/ath9k.conf

(14 May '21, 18:15) sacarde sacarde's gravatar image
0

ha mai funzionato? anche con altri sistemi

Con Windows funziona

coll. permanente

ha risposto 11 May '21, 01:06

gab90's gravatar image

gab90
20●2●2●3

  • nel link dicono di eseguire anche:

sudo update-initramfs

sudo update-grub

  • riavviare e rieseguire: sudo dmesg | grep -iE "huc|guc|dmc"

sudo cat /sys/kernel/debug/dri/0/i915_guc_load_status

(11 May '21, 08:35) sacarde sacarde's gravatar image
0

sudo dmesg | grep -iE "huc|guc|dmc"

[   15.181887] Setting dangerous option enable_guc - tainting kernel
[   15.182426] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A
[   16.780693] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[   18.338243] [drm] GuC communication enabled
[   18.348847] i915 0000:00:02.0: [drm] GuC firmware i915/skl_guc_33.0.0.bin version 33.0 submission:disabled
[   18.348853] i915 0000:00:02.0: [drm] HuC firmware i915/skl_huc_2.0.0.bin version 2.0 authenticated:yes
[ 1970.313269] [drm] GuC communication disabled
[ 1971.235782] [drm] GuC communication enabled
[ 1971.246435] i915 0000:00:02.0: [drm] GuC firmware i915/skl_guc_33.0.0.bin version 33.0 submission:disabled
[ 1971.246439] i915 0000:00:02.0: [drm] HuC firmware i915/skl_huc_2.0.0.bin version 2.0 authenticated:yes
[12757.603014] [drm] GuC communication disabled
[12758.470902] [drm] GuC communication enabled
[12758.481786] i915 0000:00:02.0: [drm] GuC firmware i915/skl_guc_33.0.0.bin version 33.0 submission:disabled
[12758.481792] i915 0000:00:02.0: [drm] HuC firmware i915/skl_huc_2.0.0.bin version 2.0 authenticated:yes
[19069.199560] [drm] GuC communication disabled
[19070.101003] [drm] GuC communication enabled
[19070.111303] i915 0000:00:02.0: [drm] GuC firmware i915/skl_guc_33.0.0.bin version 33.0 submission:disabled
[19070.111310] i915 0000:00:02.0: [drm] HuC firmware i915/skl_huc_2.0.0.bin version 2.0 authenticated:yes
[31080.322004] [drm] GuC communication disabled
[31081.203348] [drm] GuC communication enabled
[31081.213091] i915 0000:00:02.0: [drm] GuC firmware i915/skl_guc_33.0.0.bin version 33.0 submission:disabled
[31081.213097] i915 0000:00:02.0: [drm] HuC firmware i915/skl_huc_2.0.0.bin version 2.0 authenticated:yes

sudo cat/sys/kernel/debug/dri/0/i915_guc_load_status

cat: /sys/kernel/debug/dri/0/i915_guc_load_status: File o directory non esistente

sudo cat/sys/kernel/debug/dri/0/i915_huc_load_status

cat: /sys/kernel/debug/dri/0/i915_huc_load_status: File o directory non esistente
coll. permanente

ha risposto 11 May '21, 00:53

gab90's gravatar image

gab90
20●2●2●3
0

sudo dmesg | grep HDMI

[    0.110180] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

uname -a

Linux gabriele-Latitude-3470 5.8.0-52-generic #59-Ubuntu SMP Fri Apr 30 13:02:12 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

dpkg -l | grep firmware

ii  amd64-microcode                            3.20191218.1ubuntu1                 amd64        Processor microcode firmware for AMD CPUs
ii  intel-microcode                            3.20201110.0ubuntu0.20.10.2         amd64        Processor microcode firmware for Intel CPUs
ii  linux-firmware                             1.190.5                             all          Firmware for Linux kernel drivers

dmesg | grep -iE "huc|guc|dmc"

dmesg: read kernel buffer failed: Operazione non permessa
coll. permanente

ha risposto 09 May '21, 18:11

gab90's gravatar image

gab90
20●2●2●3

scusa:

sudo dmesg | grep -iE "huc|guc|dmc"

e per verifica successiva:

sudo cat /sys/kernel/debug/dri/0/i915_guc_load_status

sudo cat /sys/kernel/debug/dri/0/i915_huc_load_status

(09 May '21, 20:45) sacarde sacarde's gravatar image
0

Sì li ha presi

coll. permanente

ha risposto 07 May '21, 13:47

gab90's gravatar image

gab90
20●2●2●3

che vedi?

  • sudo dmesg | grep HDMI

  • uname -a

  • dpkg -l | grep firmware

  • ha mai funzionato? anche con altri sistemi

  • dmesg | grep -iE "huc|guc|dmc"

p.s. io mi affidavo a questa cosa qui: https://gist.github.com/Brainiarc7/aa43570f512906e882ad6cdd835efe57#file-skylake-tuning-linux-md

(07 May '21, 14:11) sacarde sacarde's gravatar image
0

Ancora come prima :( Non so se c'è uno specifico modo con cui scrivere quello che mi hai suggerito di inserire

coll. permanente

ha risposto 07 May '21, 12:59

gab90's gravatar image

gab90
20●2●2●3

per vedere se ha preso i parametri riesegui:

sudo systool -m i915 -av

e controlla se:

enable_fbc=1

enable_guc=3

(07 May '21, 13:35) sacarde sacarde's gravatar image
0

sudo systool -m i915 -av

Parameters:
disable_display     = "N"
disable_power_well  = "1"
dmc_firmware_path   = "(null)"
edp_vswing          = "0"
enable_dc           = "-1"
enable_dp_mst       = "Y"
enable_dpcd_backlight= "-1"
enable_fbc          = "1"
enable_guc          = "0"
enable_gvt          = "N"
enable_hangcheck    = "Y"
enable_ips          = "1"
enable_psr          = "0"
error_capture       = "Y"
fastboot            = "-1"
force_probe         = ""
force_reset_modeset_test= "N"
guc_firmware_path   = "(null)"
guc_log_level       = "-1"
huc_firmware_path   = "(null)"
invert_brightness   = "0"
load_detect_test    = "N"
lvds_channel_mode   = "0"
mmio_debug          = "0"
modeset             = "-1"
nuclear_pageflip    = "N"
panel_use_ssc       = "-1"
reset               = "3"
vbt_firmware        = "(null)"
vbt_sdvo_panel_type = "-1"
verbose_state_checks= "Y"
coll. permanente

ha risposto 07 May '21, 00:34

gab90's gravatar image

gab90
20●2●2●3

proviamo a impostare i parametri nel file(se non c'e' crealo):

/etc/modprobe.d/i915.conf

inserendo: options i915 enable_fbc=1 enable_guc=3

e riprovare

(07 May '21, 08:21) sacarde sacarde's gravatar image
0

dmesg | grep HDMI

dmesg: read kernel buffer failed: Operazione non permessa

systemctl --failed

  UNIT                                                  LOAD   ACTIVE SUB    DESCRIPTION                                                       >
● snap.canonical-livepatch.canonical-livepatchd.service loaded failed failed Service for snap application canonical-livepatch.canonical-livepat>

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed.
lines 1-8/8 (END)

journalctl -b -p err

- Logs begin at Wed 2021-04-21 18:56:16 CEST, end at Thu 2021-05-06 18:17:48 CEST. --
mag 06 17:46:08 gabriele-Latitude-3470 kernel: DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000aa000000-0x0000>
mag 06 17:46:37 gabriele-Latitude-3470 kernel: usb 1-8: device descriptor read/64, error -110
mag 06 17:46:44 gabriele-Latitude-3470 systemd[1]: Failed to start Service for snap application canonical-livepatch.canonical-livepatchd.
mag 06 17:48:08 gabriele-Latitude-3470 gdm-password][1568]: gkr-pam: unable to locate daemon control file
mag 06 17:48:14 gabriele-Latitude-3470 systemd[1578]: Failed to start Application launched by gnome-session-binary.
lines 1-6/6 (END)

dpkg -l | grep intel

ii  intel-media-va-driver:amd64                20.2.0+dfsg1-1                      amd64        VAAPI driver for the Intel GEN8+ Graphics family
ii  intel-media-va-driver:i386                 20.2.0+dfsg1-1                      i386         VAAPI driver for the Intel GEN8+ Graphics family
ii  intel-microcode                            3.20201110.0ubuntu0.20.10.2         amd64        Processor microcode firmware for Intel CPUs
ii  libdrm-intel1:amd64                        2.4.102-1ubuntu1                    amd64        Userspace interface to intel-specific kernel DRM services -- runtime
ii  libdrm-intel1:i386                         2.4.102-1ubuntu1                    i386         Userspace interface to intel-specific kernel DRM services -- runtime
ii  xserver-xorg-video-intel                   2:2.99.917+git20200714-1            amd64        X.Org X server -- Intel i8xx, i9xx display driver

sudo modinfo i915 | egrep -i "guc|huc|dmc"

    firmware:       i915/skl_huc_2.0.0.bin
firmware:       i915/skl_guc_33.0.0.bin
firmware:       i915/bxt_huc_2.0.0.bin
firmware:       i915/bxt_guc_33.0.0.bin
firmware:       i915/kbl_huc_4.0.0.bin
firmware:       i915/kbl_guc_33.0.0.bin
firmware:       i915/glk_huc_4.0.0.bin
firmware:       i915/glk_guc_33.0.0.bin
firmware:       i915/kbl_huc_4.0.0.bin
firmware:       i915/kbl_guc_33.0.0.bin
firmware:       i915/cml_huc_4.0.0.bin
firmware:       i915/cml_guc_33.0.0.bin
firmware:       i915/icl_huc_9.0.0.bin
firmware:       i915/icl_guc_33.0.0.bin
firmware:       i915/ehl_huc_9.0.0.bin
firmware:       i915/ehl_guc_33.0.4.bin
firmware:       i915/tgl_huc_7.0.12.bin
firmware:       i915/tgl_guc_35.2.0.bin
firmware:       i915/bxt_dmc_ver1_07.bin
firmware:       i915/skl_dmc_ver1_27.bin
firmware:       i915/kbl_dmc_ver1_04.bin
firmware:       i915/glk_dmc_ver1_04.bin
firmware:       i915/cnl_dmc_ver1_07.bin
firmware:       i915/icl_dmc_ver1_09.bin
firmware:       i915/tgl_dmc_ver2_06.bin
parm:           enable_guc:Enable GuC load for GuC submission and/or HuC load. Required functionality can be selected using bitmask values. (-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load) (int)
parm:           guc_log_level:GuC firmware logging level. Requires GuC to be loaded. (-1=auto [default], 0=disable, 1..4=enable with verbosity min..max) (int)
parm:           guc_firmware_path:GuC firmware path to use instead of the default one (charp)
parm:           huc_firmware_path:HuC firmware path to use instead of the default one (charp)
parm:           dmc_firmware_path:DMC firmware path to use instead of the default one (charp)
coll. permanente

ha risposto 06 May '21, 18:20

gab90's gravatar image

gab90
20●2●2●3

modificato 06 May '21, 18:23

e da:

sudo systool -m i915 -av

la parte relativa ai "Parametri"

p.s. lettura: https://gist.github.com/Brainiarc7/aa43570f512906e882ad6cdd835efe57

(06 May '21, 21:27) sacarde sacarde's gravatar image
La tua risposta
abilita/disabilita anteprima

Segui questa domanda

Via email:

Una volta eseguito l'accesso potrai iscriverti a tutti gli aggiornamenti qui

Via RSS:

Risposte

Risposte e commenti

Basi di markdown

  • *corsivo* o __corsivo__
  • **grassetto** o __grassetto__
  • collegamento:[testo](http://url.com/ "titolo")
  • immagine?![alt testo](/path/img.jpg "titolo")
  • elenco numerato: 1. Foo 2. Bar
  • per aggiungere un'interruzione di riga, aggiungi due spazi a fine riga e premi «Invio»
  • è supportato anche semplice HTML

informazioni su markdown

Tag:

×254
×35

domanda posta: 04 May '21, 19:49

domanda visualizzata: 868 volte

ultimo aggiornamento: 14 May '21, 18:15

Domande correlate

Audio ubuntu sparito improvvisamente

audio hdmi ubuntu 12.10

Ubuntu 14.04 non rileva audio HDMI

Audio uscita HDMI

Audio mancante nonostante il mixer mostri il segnale uscente. Speaker interni funzionanti con usb-live e installazione grafica

[RISOLTO] Aiuto! HDMI non mi trasmette audio con 18.04

Nessun suono

Audio HTML5 assente in Ubuntu 13.04

programma per regolare gli alti e bassi della scheda audio di ubuntu 13.04

uso di CLAM Chordata

Chiedi è un servizio di supporto gestito da Ubuntu-it. Contattaci!

powered by OSQA • PostgreSQL database
Ubuntu e Canonical sono marchi registrati da Canonical Ltd.