smartctl 6.2 2013-04-20 r3812 [i686-linux-3.11.0-12-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 5K160
Device Model:     Hitachi HTS541680J9SA00
Serial Number:    SB2201SGG7LELB
LU WWN Device Id: 5 000cca 51cc373d0
Firmware Version: SB2OC70P
User Capacity:    80,026,361,856 bytes [80,0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 T13/1532D revision 1
Local Time is:    Mon Nov 25 21:52:56 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (  645) seconds.
Offline data collection
capabilities:            (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    (  44) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   106   106   040    Pre-fail  Offline      -       4535
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   097   097   000    Old_age   Always       -       4918
  5 Reallocated_Sector_Ct   0x0033   048   048   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   128   128   040    Pre-fail  Offline      -       36
  9 Power_On_Hours          0x0012   019   019   000    Old_age   Always       -       35898
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       3797
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       609
193 Load_Cycle_Count        0x0012   038   038   000    Old_age   Always       -       628908
194 Temperature_Celsius     0x0002   137   137   000    Old_age   Always       -       40 (Min/Max 14/64)
196 Reallocated_Event_Count 0x0032   049   049   000    Old_age   Always       -       2728
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 1499 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1499 occurred at disk power-on lifetime: 35792 hours (1491 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 0a 00 00 00 e0  Error: IDNF at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 ff 0a 00 00 00 e0 00      01:06:00.500  READ VERIFY SECTOR(S)
  37 01 00 00 00 00 40 00      01:06:00.500  SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00      01:06:00.500  IDENTIFY DEVICE
  c8 ff 00 00 00 00 e0 04      01:06:00.500  READ DMA
  c8 ff 01 00 00 00 e0 00      01:05:17.300  READ DMA

Error 1498 occurred at disk power-on lifetime: 35586 hours (1482 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 48 bf 8d ec  Error: IDNF 8 sectors at LBA = 0x0c8dbf48 = 210616136

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 bf 8d ec 00      03:02:36.700  READ DMA
  c8 00 12 f0 33 54 e0 00      03:02:36.700  READ DMA
  c8 00 01 00 f8 0a e0 00      03:02:36.600  READ DMA
  c8 00 1a 10 34 54 e0 00      03:02:36.600  READ DMA
  c8 00 08 48 bf 8d ec 00      03:02:36.500  READ DMA

Error 1497 occurred at disk power-on lifetime: 35586 hours (1482 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 48 bf 8d ec  Error: IDNF 8 sectors at LBA = 0x0c8dbf48 = 210616136

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 bf 8d ec 00      03:02:36.500  READ DMA
  c8 00 08 d0 10 6c e0 00      03:02:36.500  READ DMA
  c8 00 01 00 f8 0a e0 00      03:02:36.500  READ DMA
  c8 00 0d d8 33 54 e0 00      03:02:36.500  READ DMA
  c8 00 08 48 bf 8d ec 00      03:02:36.400  READ DMA

Error 1496 occurred at disk power-on lifetime: 35586 hours (1482 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 48 bf 8d ec  Error: IDNF 8 sectors at LBA = 0x0c8dbf48 = 210616136

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 bf 8d ec 00      03:02:36.400  READ DMA
  c8 00 0d c8 33 54 e0 00      03:02:36.400  READ DMA
  c8 00 01 00 f8 0a e0 00      03:02:36.400  READ DMA
  c8 00 08 60 a7 ec e3 00      03:02:36.400  READ DMA
  c8 00 08 c8 10 6c e0 00      03:02:36.300  READ DMA

Error 1495 occurred at disk power-on lifetime: 35586 hours (1482 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 08 48 bf 8d ec  Error: IDNF 8 sectors at LBA = 0x0c8dbf48 = 210616136

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 48 bf 8d ec 00      03:02:36.300  READ DMA
  c8 00 07 b8 33 54 e0 00      03:02:36.300  READ DMA
  c8 00 01 00 f8 0a e0 00      03:02:36.300  READ DMA
  c8 00 12 40 ad 3c e0 00      03:02:36.300  READ DMA
  c8 00 80 c0 ac 3c e0 00      03:02:36.200  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     35898         -
# 2  Extended offline    Aborted by host               30%     35898         -
# 3  Short offline       Completed without error       00%     35894         -
# 4  Extended offline    Aborted by host               70%     35894         -
# 5  Extended offline    Interrupted (host reset)      50%     35792         -
# 6  Short offline       Completed without error       00%     35616         -
# 7  Short offline       Completed without error       00%     31448         -
# 8  Short offline       Completed without error       00%     31448         -
# 9  Short offline       Completed without error       00%     31329         -
#10  Short offline       Completed without error       00%     29386         -
#11  Short offline       Completed without error       00%     26619         -
#12  Short offline       Completed without error       00%     20991         -
#13  Short offline       Completed without error       00%      7828         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

chiesto 25 Nov '13, 22:17

molla86's gravatar image

molla86
10233

modificato 25 Nov '13, 22:45

rpadovani's gravatar image

rpadovani ♦♦
3.1k51351

Scrivi tu la prima risposta!
abilita/disabilita anteprima

Segui questa domanda

Via email:

Una volta eseguito l'accesso potrai iscriverti a tutti gli aggiornamenti qui

Via RSS:

Risposte

Risposte e commenti

Basi di markdown

  • *corsivo* o __corsivo__
  • **grassetto** o __grassetto__
  • collegamento:[testo](http://url.com/ "titolo")
  • immagine?![alt testo](/path/img.jpg "titolo")
  • elenco numerato: 1. Foo 2. Bar
  • per aggiungere un'interruzione di riga, aggiungi due spazi a fine riga e premi «Invio»
  • è supportato anche semplice HTML

Tag:

×1,715

domanda posta: 25 Nov '13, 22:17

domanda visualizzata: 5,048 volte

ultimo aggiornamento: 25 Nov '13, 22:45

Chiedi è un servizio di supporto gestito da Ubuntu-it. Contattaci!

powered by OSQAPostgreSQL database
Ubuntu e Canonical sono marchi registrati da Canonical Ltd.